TEL 10-2422WI

DC/DC Converter TEL 10WI Series, 10 Watt • Most compact 10 Watt converter in DIP-16 metal casing • • Highest power density of 3.83 W/cm³ • • • Ultra wide 4:1 input voltage range • • Built-in EN 55032 class A filter • 3-year product warranty 6-side shielded metal case with insulated base plate UL 62368-1 IEC 62368-1 High efficiency for low thermal loss Operating temperature range of -40°C to +88°C Protection against short circuit and overload The TEL 10WI series is a range of isolated 10 Watt converters which come in an ultra compact DIP-16 metal package. The design purpose of these series was to miniaturize low power DC/DC converters to the maximum without sacrificing high efficiency. The TEL 10WI series sets the new standard for power density with 3.83 W/cm³. The TEL 10WI series offer an ultra wide 4:1 input voltage range and feature a high efficiency of up to 86% which enables an operation temperature of up to +70°C at full load and up to 88°C with 50% load. The converters have an internal input filter to comply with conducted emission EN 55032 class A. The TEL 10WI Series models are an economical solution for space critical and cost sensitive applications in instrumentation, IT and industrial electronics. Models Order Code Input Voltage Range TEL 10-2410WI TEL 10-2411WI TEL 10-2412WI TEL 10-2413WI TEL 10-2415WI TEL 10-2422WI TEL 10-2423WI TEL 10-4810WI TEL 10-4811WI TEL 10-4812WI TEL 10-4813WI TEL 10-4815WI TEL 10-4822WI TEL 10-4823WI www.tracopower.com 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5.1 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 2'700 mA 2'000 mA 833 mA 666 mA 416 mA 416 mA 333 mA 2'700 mA 2'000 mA 833 mA 666 mA 416 mA 416 mA 333 mA March 10, 2022 Vnom Efficiency Imax –12 VDC –15 VDC 416 mA 333 mA –12 VDC –15 VDC 416 mA 333 mA typ. 80 % 83 % 87 % 88 % 88 % 87 % 87 % 80 % 83 % 87 % 88 % 88 % 87 % 87 % Page 1 / 4 TEL 10WI Series, 10 Watt Input Specifications Input Current - At no load 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: - At full load Surge Voltage Under Voltage Lockout Recommended Input Fuse Input Filter 10 mA typ. 7 mA typ. 480 mA max. 240 mA max. 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 7 VDC min. / 8 VDC typ. 15 VDC min. / 16 VDC typ. 2'000 mA (slow blow) 1'000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise (20 MHz Bandwidth) - Cross Regulation (25% / 100% asym. load) - single output - dual output - single output - dual output Capacitive Load - single output - dual output ±1% max. 0.8% max. 0.8% max. 1% max. 2% max. (Output 1) 2% max. (Output 2) dual output models: 5% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5.1 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: 3.3 Vout models: 5.1 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: 3.3 Vout models: 5.1 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation Transient Response - Response Deviation - Response Time 60 mVp-p typ. 60 mVp-p typ. 80 mVp-p typ. 80 mVp-p typ. 80 mVp-p typ. 80 / 80 mVp-p typ. 80 / 80 mVp-p typ. 75 mVp-p max. 75 mVp-p max. 100 mVp-p max. 100 mVp-p max. 100 mVp-p max. 100 / 100 mVp-p max. 100 / 100 mVp-p max. 2'600 µF max. 1'300 µF max. 560 µF max. 560 µF max. 200 µF max. 390 / 390 µF max. 200 / 200 µF max. Not required ±0.02 %/K max. 30 ms typ. / 60 ms max. Continuous, Automatic recovery 195% max. of Iout max. 160% typ. of Iout max. 5% max. (25% Load Step) 500 µs max. (25% Load Step) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com March 10, 2022 Page 2 / 4 TEL 10WI Series, 10 Watt Safety Specifications Safety Standards EN 62368-1 IEC 62368-1 UL 62368-1 www.tracopower.com/overview/tel10wi PD 3 - IT / Multimedia Equipment - Certification Documents Pollution Degree EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions External filter proposal: EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge External filter proposal: - Conducted RF Disturbances - PF Magnetic Field Continuous: EN 55032 class A (internal filter) EN 55032 class B (with external filter) FCC Part 15 class A (internal filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/tel10wi EN 55024 (IT Equipment) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 20 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A www.tracopower.com/overview/tel10wi EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile 95% max. (non condensing) –40°C to +88°C +105°C max. –50°C to +125°C See application note: www.tracopower.com/overview/tel10wi Natural convection (20 LFM) 6'000 m max. 355 - 485 kHz (PWM) 420 kHz typ. (PWM) Functional Insulation 1'500 VDC - Input to Output, 60 s 1'800 VDC - Input to Output, 1 s 1'000 VDC - Input to Case, 60 s 1'000 VDC - Output to Case, 60 s 1'000 MΩ min. - Input to Output, 500 VDC 1'500 pF max. - Input to Output, 100 kHz, 1 V - Calculated MTBF 2'540'000 h (MIL-HDBK-217F, ground benign) Allowed (hermetical product) See Cleaning Guideline: www.tracopower.com/info/cleaning.pdf Alu alloy, black anodized coating Epoxy (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2 - 4 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount THD (Through-Hole Device) DIP16 Wave Soldering 260°C / 10 s max. - Operating Temperature - Case Temperature - Storage Temperature - High Temperature All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com March 10, 2022 Page 3 / 4 TEL 10WI Series, 10 Watt Weight 6.5 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) Environmental Compliance - REACH Declaration - RoHS Declaration Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tel10wi Outline Dimensions Pinout 7 bottom view 16 10 13.7 (0.54) 10.16 (0.40) 1 8 9 Pin Single Dual 1 –Vin (GND) –Vin (GND) 7 NC NC 8 NC Common 9 +Vout +Vout 10 –Vout –Vout 16 +Vin (Vcc) +Vin (Vcc) 15.24 (0.60) 1.77 (0.07) NC: Not connected 3.0 2.54 (0.1) (0.12) 3.8 Dimensions in mm (inch) Tolerances: x.x ±0.5 (±0.02) x.xx ±0.25 (±0.01) Pin diameter 0.5 ±0.05 (0.02 ±0.002) (0.15) 8.0 (0.31) 23.8 (0.94) ø 0.5 (0.02) © Copyright 2022 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. March 10, 2022 Page 4 / 4